Machines

Floor Sanding Machines in Falmouth, MA

Drum sanders, edgers and buffers sold outright to contractors and serious owners. We do not run a rental counter, and there are good reasons for that.

  • Sold, not rented
  • Full abrasive range
  • Setup guidance
  • Contractor pricing
Professional floor sanding machines for sale at JR Hardwood Supplies Falmouth MA

At a glance

Where
112 Davis Straits, Falmouth, MA 02540
Hours
Mon-Fri 8am-5pm · Sat 8am-2pm
Machines
Drum sanders, edgers, buffers
Model
Sold outright, no rental
Abrasives
Full grit range in stock
Pricing
Contractor accounts available
Call to confirm today's stockGet directionsContractor pricing
Quick answer

JR Hardwood Supplies sells floor sanding machines outright. We do not rent equipment. We carry professional drum sanders, edgers and buffers in Falmouth along with the full abrasive range to feed them. Call (508) 524-8957 for current models, availability and pricing.

Why we sell instead of renting

A rental machine has been used by everyone before you, and you have no idea how. The drum may be out of round, the bearings tired, the dust bag torn. You find that out mid job, on someone else's floor.

You also work against a clock. Renting by the day pushes people to rush the grit sequence, which is exactly where floors get ruined. A machine you own lets the job take the time it needs.

For a contractor doing this repeatedly the math is not close. A machine pays for itself in a handful of jobs and then keeps working. For a homeowner doing one floor, renting from a rental yard may still make more sense, and we will say so rather than sell you something you do not need.

The three machine setup

Drum sander

Does the field, meaning the main open area. This is the machine that removes material and flattens the floor, and also the machine that gouges a floor in under a second if it sits still with the drum down. Start walking before lowering the drum, and never stop mid pass.

Edger

A disc sander for the perimeter, closets and under toe kicks, everywhere the drum cannot reach. It cuts in circles while the drum cuts with the grain, so edger scratches read more visibly at the same grit. Run the edger one grit finer than the drum on the final pass, then blend with the buffer.

Buffer

Screens between coats, blends the transition between drum and edge work, and does final prep before finish. Skipping the buffer is why so many DIY floors show a visible ring around the perimeter of every room.

Before buying a drum sander

These machines are heavy and they remove wood fast. If you have never run one, read the grit sequence guide and the DIY sanding walkthrough first. If the floor is antique, unusually thin or valuable, hiring a professional is usually the better investment and we will tell you that.

What you also need

A machine with no abrasive is a paperweight. Plan on a full grit sequence in the right belt or disc size, plus screens for the buffer, and budget at least fifty percent more paper than the coverage chart suggests. Old finish and residual wax load abrasive far faster than bare wood.

  • Drum belts across the sequence, typically 36, 60, 80 and 100
  • Edger discs in matching grits plus one finer
  • Buffer screens, usually 120 for final prep
  • Dust bags and filters
  • Respirator, eye and hearing protection

All of it is on the abrasives page, and we can build a list for your machine and floor size over the phone.

Frequently asked questions

Do you rent floor sanders?
No. We sell machines outright and do not operate a rental counter. We carry professional drum sanders, edgers and buffers in Falmouth along with the full abrasive range. For a contractor who sands regularly, buying pays for itself in a handful of jobs. For a homeowner doing one floor once, renting from a rental yard may still make more sense, and we will tell you that honestly.
What machines do I need to sand a floor?
Three. A drum sander for the main open field, an edger for the perimeter and anywhere the drum cannot reach, and a buffer to screen between coats and blend the transition between the two. Skipping the buffer is the reason many DIY floors show a visible ring around the perimeter of every room.
Is buying a floor sander worth it instead of renting?
For a contractor, yes, and the math is not close. A machine pays for itself in a handful of jobs and then keeps working, with no clock running and no uncertainty about how the previous user treated it. Renting by the day also pushes people to rush the grit sequence, which is exactly where floors get ruined.
How much sandpaper do I need?
At least fifty percent more than the coverage chart suggests. Estimates assume clean bare wood, but old finish, wax and adhesive load abrasive far faster. Change paper when the cut slows rather than when it looks worn, because worn paper burnishes wood instead of cutting it and leaves a polished surface that will not take stain evenly.
Do you offer contractor pricing on machines and supplies?
Yes. We are a contractor first store and work directly with flooring professionals across Cape Cod and the Islands on pricing for regular orders. See the contractors page or call (508) 524-8957 to set up an account.

Keep reading

Call before you drive.

One call confirms what is on the shelf today. 112 Davis Straits, Falmouth, MA 02540. Mon-Fri 8am-5pm, Sat 8am-2pm.

Call (508) 524-8957 Get Directions